Replacement Locks For Patio Doors at Lowe's
Replacing the lock on your patio door is a simple way to improve your home's security. However, it is essential to maintain the lock regularly and install the lock properly.
It is essential to know what kind of patio door lock you have to replace it successfully. You can identify the type by observing the size of the screw hole as well as the type of face plate at the end.
Identifying Your Lock's Existing Lock
When deciding to purchase new hardware for your lock, it's essential that you be aware of the differences between types of locks. This will enable you to choose a lock that is suitable for your home and also ensure the security and safety of your home.
The most popular type of lock is the cylinder lock sometimes referred to a pin and tumbler lock. This type of lock uses combination of bottom pins springs, top pins and top pins to secure the keyhole and plug. Cylinder locks come in a variety sizes, and it is important to determine the exact length and width of the cylinder you currently have before buying the replacement.
To determine the size of the lock you have, use a screwdriver to loosen the screws that hold the cylinder in place, and then gently pull it out. Then, you can measure the distance in millimeters that lies between the outer edge and the inner part of the cylinder. You can then check this number against the measurements of the new lock you're planning on buy. This will help ensure that your new lock is the correct size and fits in the hole in the door lock.
Another way to determine the correct size of your lock is to test it with the help of a key. If the key slides into the cylinder easily, it is the width of the rekeying kit you need. However, if the key does not slide in, it's likely that your cylinder has different keyways and cannot be rekeyed to accept the brand of key.
It is essential to review the instruction manuals provided by the manufacturer that come with a kit for rekeying. Every type of lock comes with its own set of specific installation requirements. It is crucial to test the new lock thoroughly following installation to ensure it operates correctly and provides maximum security. It is also essential to be aware of any additional features that your new lock might include in order to determine the ease of operate.
Measure the Width
A faulty patio door lock can lead to serious security concerns. It's essential to regularly inspect your locks and replace them if required. This will ensure that they are functioning properly and are secure. It could also help prevent issues such as a broken latch or keyway. If your current locks are damaged or worn out, damaged, you can find replacements at Lowe's that will provide the security your home needs.
Before you purchase a new patio door lock, you need to measure the dimensions of your current one. upvc door replacement lock repairmywindowsanddoors will help you to know what size lock to purchase and avoid the risk of buying the wrong lock. fit. To do this, you'll need make two measurements that are the length of the backset and the depth of the case. The first is a distance between the edge of the lock's face and that of the middle of the hole that the handle spindle passes through. The second refers to observing the depth of an lock from the outside.
It's also important to think about how you will be using your doors when deciding what type of lock you need. If your sliding doors open horizontally you will need a top-and-bottom tab style lock which engages with the strikeplate, preventing it from being pushed or forcefully opened. If your patio doors are vertically open, you'll need to choose a mortise latch with an attached hook latch that is spring loaded for added security.
It's important to note the location of the screw holes when determining the size of your lock. Some mortise locks come with round screws while others have square screws. You'll need to know where the keyway is located. Some locks have a vertical keyway while others have a 45-degree angle. Take a photograph of the lock using a digital camera to ensure you receive the right replacement.
After you've measured your home and have a plan for your home, it's time to search for the best patio door lock. On the internet, you'll find a variety of top-quality locks. Many of the brands have advanced security features to ensure your home's security. Selecting the right lock is an investment in the security of your home It is therefore essential to do some research and read reviews before making a purchase. Be sure to maintain your locks regularly to keep debris and dirt from blocking your doors.
Make sure you check the screw holes
Patio doors are an important element of your home's security. They should be checked for signs of wear and tear to ensure they function properly. Over time, the locks and spindle that connect your interior and exterior handles could need to be replaced. A durable lock will not only block unwanted entry, but also increases energy efficiency, safety and security.
There are many ways you can narrow your search for a new lock, if you don't have the right model. First, you must determine the type of keyway that is employed. Rectangular mortise locks with cutouts are typically used in aluminum patio doors. E2126 and E2079 locks are installed in a recess inside the frame of vinyl or wood patio doors. If you have an electronic camera, uploading a photograph of the lock may help you determine what kind of lock it is.
Another method of determining the kind of lock you have is to look at the screw holes. The majority of sliding patio door locks have screw holes that align with the latch keeper mounted on the side jamb. However, they may not be identical. For example certain screws are longer than others and could have an end with a different threaded. Some screws are equipped with washers or a hexagonal nut to them, which alter how they fit into the lock's hasp.
Once you have a clear idea of the type of lock you own you can begin preparing to install the new lock. You'll need to clean the lock with a damp cloth or brush to get rid of any debris that could hinder its operation. After the lock has been cleaned then you can apply a silicone-based grease to keep it in good shape and quiet.
It's a great idea replace your screws with longer ones. This will allow you get an improved grip, and will allow you to install the lock more easily. After you've done this it's a good idea to test the handle to determine how the latch works with the lock.
If it doesn't engage easily it could be necessary to put an hex nut or washer behind the hasp to allow it to hold more of the door's lip. You can add a shim to the side of the lockkeeper's jamb and see if that helps.
Check the Lock Snib
The snib is the mechanism that locks your door handle. You can turn on and off the snib to open and close your patio doors. It's the first thing to check in the event that your locks aren't working properly. Also, you can check the keepers (located on the top and bottom of the door frame) to determine if they are loose or have a misalignment that could cause them to shear. Check that your snib lock is properly seated and that the lock isn't snagged or otherwise blocked in any way.
The most commonly used patio door locks are steel mortise locks that secure sliding glass doors. Installed into the door frame they are available in various styles and are a great security measure. Some are designed to fit keys, while others utilize an oval cutout to allow easy locking and unlocking.
A step-on lock that is a thumb screw is a different option. It will keep your sliding door in place without the need to turn the knob. These locks are typically found on older metal-framed doors however they can be used to secure vinyl or wooden-framed sliding door frames.
When you inspect your existing patio lock, take note of the type and size of screw holes used to attach the escutcheon and lock body. This will help you pick a lock that has the correct screw holes. It's a good idea also to inspect your strike plate to make sure it's securely secured.
If you own Jason Windows boltlock sliding doors between 2000 and 2009, be sure the keeper screws are secured and not missing or loose. These screws hold the snib partially open in "vent" mode, which allows airflow, while still encouraging security. They are also crucial to prevent your lock from being sheared. All locks must be maintained and cleaned regularly to avoid dirt, dust, corrosion or debris from obstructing their operation.
If your snib is broken, it may be possible to replace the entire strike plate and snib unit. If your snib just requires alignment, you can correct it by removing the strikeplate with an abrasive blade and backing out the adjustment screws (located above and beneath the screw). Then, you'll have to move the strikeplate upwards or down until the engagement tongue lines up the Milgard logo.